Extraction section of the plant has been reconstructed and built new equipment (Schumacher toaster) which has improved the quality of the meal and increased capacity by over 20%. At the same time in crushing plant was built the "Krupp" press, and its pressing capacity was increased by 43%. Then was built a new packaging line for 1 ℓ oil in PET package at the capacity of 6000-8000 units per hour. After that was built in the boiler using solid fuel (biomass) capacity of 10 tons of steam per hour with a new water treatment plant which provides good quality water for the boiler plant. In the next three years the development will be focused on problems such as:

In parallel with these activities we are working on expanding the product range and introducing new products in the area of our core business.

• •Bring the emissions of dust in flue gases in limits according to regulations. Equipment for this purpose had been purchased and will be activated and then checked for the results achieved.

• •Another direction in the ecology where we intend to solve the problem of the waste water, with the aim of its treatment and actievment such a quality which is prescribed by the law. Concerning the  energy we will br focused on the substitute gas as an energy source by biofuel. Equipment was purchased for this purpose that all the organic waste resulting from the purchase and production process, which was so far discarded should be converted into heat energy. Energy from waste reaches 20-25% of total energy demand. In parallel with this work we intend to increase energy efficiency, which in turn contributes to the achievement of higher fuel and energy effects with the same amount of fuel. Fuel savings are expected at the level of 15-20 %. All these measures will contribute to substitute gas, as the most expensive fuel, with biofuel.

• The third line of activity is taking place to improve the storage conditions of raw materials,  intermediate products and finished products in order to reduce costs, maintain and improve the quality, hygiene and product safety. For this purpose, a new warehouse is built and installation of proper equipment is planned for maintaining conditions in newly built premises.